Had a ton of fun this weekend at Woodburn Dragstrip in Oregon, I've been prepping for a while and ordering tons of stuff to get ready.
Finally had time to install everything Friday night and was up til almost 1 am making everything good to go.
Got to the track around 9 am and started swapping over to my slicks, then went and got teched in.
First pass had issues with the clutch in 3/4th gear, had to let out and ran a 13.7 @ 92, second pass had issues with the clutch and feathered it for a split second in 3rd and got back in it.
The second time sheet in the picture, the 12.5, I actually launched the car with Cobb launch settings set to 4750, it dead hooked and left.
Last pass I launched at the same rpm, but let the clutch out slightly faster. I lost 3 mph up top, felt like clutch was letting go at the top of 3rd and a little of 4th. Also forgot to take logs of all my runs to send to my tuner, it was pulling some timing in Cyl 3 and Cyl 1. Might be false knock though, had that issue already.
Car definitely has high 11's in it with a stronger clutch and harder launch + fixing the timing issues.
Finally had time to install everything Friday night and was up til almost 1 am making everything good to go.
Got to the track around 9 am and started swapping over to my slicks, then went and got teched in.
First pass had issues with the clutch in 3/4th gear, had to let out and ran a 13.7 @ 92, second pass had issues with the clutch and feathered it for a split second in 3rd and got back in it.
The second time sheet in the picture, the 12.5, I actually launched the car with Cobb launch settings set to 4750, it dead hooked and left.
Last pass I launched at the same rpm, but let the clutch out slightly faster. I lost 3 mph up top, felt like clutch was letting go at the top of 3rd and a little of 4th. Also forgot to take logs of all my runs to send to my tuner, it was pulling some timing in Cyl 3 and Cyl 1. Might be false knock though, had that issue already.
Car definitely has high 11's in it with a stronger clutch and harder launch + fixing the timing issues.
Attachments
-
6 MB Views: 1