Retrofit Headlight Service (Old Group Buy-No Longer Active)

[NorthLightingConcepts]

[Not sure if this should be in sale forum or group buy forum?]

Group buy is completed. Those who wish to have this service completed by myself, please PM or post and we can discuss the details.


I could offer the following options at introductory prices for the first 3 individuals and they would be recognized below and would have their build progress publicly displayed for the rest to drool over and be jealous of.

1) Negi
2)TyphoonFist
3) CSM

Acme Standard H1 $ TBD
These would include the relay harness, Acme SuperStart Ballast, Morimoto relay and B stock Bullet shroud (may have factory blemishes) and the acme bulbs from 4300,5k, 6k. These have a 6 month factory warranty on projectors and 1 year on the ballast. These are basic projector and will provide a moderate improvement over stock. These are a budget option that gets the job done.

Acme Super H1 $TBD
These would include the Acme SuperStart Ballasts, Morimoto relay, and B stock Bullet shroud (may have factory blemishes), and acme bulbs 4300k, 5k,6k. These have a higher quality control than the Acme standard, but are essentially the same as above. These will have slight better output and less chances of factory defects or issues down the road as a result of better quality control. These are best of quality that Acme produces and as such are "super"ior to the Acme standards.

Morimito Mini H1 8.0. $TBD. These would come with Hylux 2A88 ballasts, Morimoto relay and Bullet shroud and your option of Morimoto XB bulbs in 3800k,4k,5k,6k. These would be the premium option. Personally run by myself and have an outstanding warranty of 3 year on the projector and ballast.


Want something cooler or just want to stand out?

Upgrade Acme Speedy Start to Hylux Ballasts $30
Profile Prism Switchback Halo for $90 (Amber/White)
Profile Prism RGB Halo $200 w/ Bluetooth Controller
Blackout All That Chrome $50
ColorMatch All That Chrome $75 (Will need to provide paint code to have it color matched)
DemonEyes (Morimoto MiniH1 8.0 ONLY) [Amber,Red, Green, White, Purple, Blue] $45

Any questions please PM me.

See photos below for examples of my work.





See below other models I have done in the past. Currently however, I will be doing only Fiesta ST models at this time.

 

[borborpa]

Is the second garage pic with the high beams on?

 

[NorthLightingConcepts]

Is the second garage pic with the high beams on?

Yes. This is at a measured 25ft away.

 

[borborpa]

Yes. This is at a measured 25ft away.

Nice. That cutoff on the low beam pics is SHARP! Does the retrofit involve pulling my headlights and sending them off for the work? (I assumed this, just wanted to make sure)

[EDIT] Nevermind that last part...I need to learn to finish reading.

 

[NorthLightingConcepts]

Nice. That cutoff on the low beam pics is SHARP! Does the retrofit involve pulling my headlights and sending them off for the work? (I assumed this, just wanted to make sure)

[EDIT] Nevermind that last part...I need to learn to finish reading.

You can send in your headlights if you’d like too. I can source an aftermarket for around $170-200 depending on availability.
That cutoff is with the Mini H1s which is the most expensive option but offers the best performance.

 

[NorthLightingConcepts]

We have our first member, Negi who has decided he will struggle to see through the darkness no more! He will be the light others follow and a beacon of.....well anyway, let there be light.

Who else wants to get in on this, two spots left until I figure out that I grossly underestimated the cost and will need to charge more.

 

[Peterson]

Where are you located?

 

[NorthLightingConcepts]

Where are you located?

Sent a PM. Parts arrived for Negi's builds today. Waiting on one headlight to come in and we are ready to roll!

 

[Heavy_D]

What about LED projectors instead of HID

 

[NorthLightingConcepts]

What about LED projectors instead of HID

LED projectors are inferior output and distance wise to an HID. I’ve can fit them in the headlight if you wish, but one fails then you have to have them torn apart and redone where as if the bulb fails then you simply install a new one.

 

[TyphoonFiST]

Joined the band wagon! Bye bye halogen headlights forever....Retrofit here I come

Sent from my SM-N975U1 using Tapatalk

 

[NorthLightingConcepts]

Indeed you are number two on the list....who wants to be number 3!

 

[FiestaSTy]

Indeed you are number two on the list....who wants to be number 3!

I absolutely WANT to be. I also want to survive the weekend and I don't think my wife would allow me to do both at the moment [emoji6].

Sent from my SM-G975U using Tapatalk

 

[TyphoonFiST]

I absolutely WANT to be. I also want to survive the weekend and I don't think my wife would allow me to do both at the moment [emoji6].

Sent from my SM-G975U using Tapatalk

You can be! Just tell your wife its better than a bottle in your hand or a needle in your arm!

Sent from my SM-N975U1 using Tapatalk

 

[NorthLightingConcepts]

You can be! Just tell your wife its better than a bottle in your hand or a needle in your arm!

Sent from my SM-N975U1 using Tapatalk

I’m dead. Yoooooo. Lol

 

[TyphoonFiST]

I’m dead. Yoooooo. Lol

Jonathan Goldsmith is only 81...he still kicking dawg!

Sent from my SM-N975U1 using Tapatalk

 

[FiestaSTy]

You can be! Just tell your wife its better than a bottle in your hand or a needle in your arm!

Sent from my SM-N975U1 using Tapatalk

Dang...

Sent from my SM-G975U using Tapatalk

 

[CSM]

I'm interested in the H1s. Can you source lights for me? PM me

 

[NorthLightingConcepts]

CSM is the 3rd and final member for this group buy.
Please stay tuned for updates on each build as they are built in order!

 

[NorthLightingConcepts]

At this time those who are interested may be waitlisted until these 3 are completed.